Replacement Brushes for Tennant T681

Brushes used on the Tennant T681

OEM part numbers are listed for cross-reference only. Sizes are confirmed against your old brush or drawing before production.

Fill options

• Disc scrub brush: Soft polypropylene (SPPV02649); Medium polypropylene, standard (SPPV02648); Abrasive bristle (SPPV02650)
• Pad driver: Short-trim pad driver for 16 in pads

Matching products we build

PP Disc Scrub Brush, 12–21 in

Polypropylene, 0.5–0.6 mm standard

Built to your T681's dimensions

Short-Trim Pad Driver, 12–21 in (Tennant 1220222 type)

Polypropylene short-trim bristle

Built to your T681's dimensions

Variants and what to check

The medium polypropylene brush (SPPV02648) is the standard fit. The sheet gives brush size 16 in / 42 cm but pad size 16 in / 43 cm, so check the old brush. Brush quantity and cleaning path are not stated on the sheet; count the brushes on the deck before ordering.

What to send us for a quote

• Outer diameter of the brush or pad driver, measured across the bristle tips.
• The drive hub on top: clutch-plate type, number of lugs, or the hole pattern — a clear photo is usually enough.
• Trim length (how far the bristles stick out of the block) and the current fill: polypropylene, nylon or abrasive grit.
• For cylindrical decks: overall length, core diameter and the shape of the drive ends.
• Your machine model (Tennant T681) and, if you have it, the OEM part number from the old brush.

Frequently asked questions

What size brushes does the Tennant T681 use?

Tennant lists 16 in (42 cm) disk brushes.

Which T681 brush is standard?

SPPV02648, the medium polypropylene brush. A soft (SPPV02649) and an abrasive (SPPV02650) version are also listed.

Do T681 brushes fit the T581?

No. The T581 sheet lists a 20 in brush with different numbers (SPPV01332, SPPV01495).

Machines sharing these part numbers

Other Tennant machines

Further reading