Crimped Wire Wheel
6 products
Crimped Wire Wheel8 in Crimped Steel Wire Wheel (Bench)
Carbon steel wire
Rust, paint and surface preparation
Crimped Wire Wheel10 in Crimped Wire Wheel
Carbon steel wire
Bench-grinder surface cleaning
Crimped Wire Wheel65 mm Crimped Wire Wheel Brush, 6 mm Shank
Crimped steel wire, 0.3 mm
Drill and die-grinder cleaning of rust and burrs
Crimped Wire WheelCrimped Brass Wire Wheel Brush, 100–300 mm
Crimped brass wire (0.2)
Soft, non-sparking cleaning and polishing of soft metals
Crimped Wire WheelCrimped Stainless Steel Wire Wheel Brush, 100–350 mm
Crimped stainless steel wire (carbon steel / brass options)
Rust, scale and weld-spatter cleaning on bench and pedestal grinders
Crimped Wire WheelWide-Face Crimped Steel Wire Wheel, 200 × 32 mm Bore
Crimped stainless steel wire (0.3)
Weld blending, deburring and surface finishing on wide faces
Crimped wire wheels use springy, wave-crimped carbon steel wire that flexes to follow the contour of a workpiece, making them the standard choice for general rust, scale, and paint removal on bench grinders where a stiffer knotted wire wheel would be too aggressive. We stock an 8 in wheel (0.012 in wire, rated to 4500 RPM, with a multi-bushing arbor adapting to 1/2–2 in spindles) and a 10 in wheel (0.016 in wire, rated to 3600 RPM) — the larger diameter and thicker wire giving more aggressive stock removal at the cost of a lower safe maximum speed. Outer diameter, arbor bore, and maximum RPM all have to match your grinder before anything else matters. Built to order at our Yuantan factory cluster, wire gauge and fill density can be configured for your specific surface-prep job.