Sweeper Brush Cross-Reference Guide: Matching Replacement Brooms to Nilfisk, Dulevo, Johnston, Bucher and Broce Machines

1. Why brand name alone isn't enough

A single manufacturer typically sells multiple sweeper platforms (compact walk-behind units, mid-size truck-mounted sweepers, large regenerative-air sweepers), and broom size and mounting style usually vary across that range for mechanical reasons — a bigger machine needs a bigger broom. This means "a Nilfisk broom" isn't one part number; it depends on which Nilfisk model, and sometimes which model year, you have.

The reliable way to cross-reference is the same regardless of brand: measure the old broom (or the mounting point on the machine) directly, using the three measurements covered in the next section, and match on those numbers rather than the brand badge.

2. The measurements that actually matter

• Outer diameter (OD) — measured across the full fill, not just the hub or backing plate.
• Mounting interface — bore diameter and bolt pattern for a flanged mount, thread size for a threaded stud, or the quick-change disc profile if your machine uses a tool-less system.
• Fill material and trim — poly, steel wire, or combination (see our gutter broom material guide), and how far the fill extends from the backing.

3. Nilfisk-family sweepers

Nilfisk's sweeper range spans compact and mid-size machines, and gutter brooms across the range are commonly supplied with a threaded stud or quick-change disc mount rather than a loose bolt pattern, intended for fast tool-less or low-tool swaps in the field. Diameter and fill material vary significantly by model — see our Nilfisk road sweeper side gutter broom for a representative spec, and confirm your exact model's broom diameter before ordering rather than assuming range-wide consistency.

4. Dulevo-family sweepers

Dulevo's compact and mid-size sweepers are common in municipal and contractor fleets, and their gutter brooms commonly use similar quick-change or threaded mounting approaches to Nilfisk's range for the same reason — fast field replacement. Because Dulevo also spans multiple machine sizes, broom diameter is the number to confirm first; don't assume a Dulevo broom from one model fits another.

5. Johnston-family sweepers

Johnston sweepers, common in municipal fleets particularly in the UK and Europe, cover a similarly broad range from compact to large regenerative-air units. As with the other brands, the main broom and gutter brooms scale with machine size, and the mounting approach (flanged bolt pattern vs stud vs quick-change) depends on the specific model rather than being constant across the brand.

6. Bucher and Broce sweepers

Bucher's sweeper range (including machines sold under the Bucher Municipal name) and Broce's broom-style sweepers — which are closer in concept to an agricultural rotary broom than a disc-type gutter broom on some models — both follow the same underlying rule: measure the mounting interface and fill dimensions directly rather than relying on a brand-wide assumption. Broce in particular uses some constructions that differ structurally from the typical disc gutter broom, so a physical sample or clear photo is especially useful for these machines.

7. How to submit a cross-reference request

The fastest way to get an accurate match is to send us the old broom's measurements (or the broom itself), the machine brand and model if known, and a photo of the mounting interface via RFQ. We'll confirm fit against our existing specs or, for less common models, treat it as a custom reverse-engineering job — the process is the same either way, and not having the exact model number doesn't stop us from matching the part.

Frequently asked questions

I know my sweeper brand but not the model — can you still help?

Yes. Send photos and measurements of the old broom or the mounting point, and we can usually match or reverse-engineer the correct part without the exact model number.

Do all sweepers from one brand use the same mounting style?

No — mounting style typically varies by machine size and model generation within the same brand, not just between brands. Always confirm against the specific machine.

What's the fastest way to get an accurate cross-reference?

Measure the old broom directly (OD, mounting interface, fill type) and send that with a photo via RFQ — this is faster and more reliable than searching by brand and model name alone.

Can you match a broom for a machine brand not mentioned in this guide?

Yes — these five are common examples, not an exclusive list. The same measurement-based approach works for any sweeper brand or a private-label machine.

Related products